Page 1

Energizer PRODUCTDATASHEET NH15-2300(HR6) ENERGIZER AA Specifications Energizer Classification: Rechargeable Chemical System: Nickel-Metal Hydride(NiMH) RECHARGE Designation: ANSI-1.2H2 IEC-HR6 Nominal Voltage: 1.2 Volts RatedCapacity: 2300mAh at 21℃(70°F) Basedon460mA(0.2C)dischargerate TypicalWeight: 28 grams (0.99 oz.) Industry Standard Dimensions Typical Volume: 8.3cubic centimeters (0.5cubic inch) mm (inches) Terminals: FlatContact Jacket: Plastic 14.50(0.571) 13.50 (0.531) 1.00 (0.039) 5.50 (0.217) Minimum Maximum Internal Resistance: Theinternalresistance ofthecell varies with stateofcharge,asfollows: CellCharged Cell1/2Discharged 50.50 (1.988) 49.20(1.937) 30 milliohms 40 milliohms (tolerance of ±20% applies to above values) 7.00 (0.276) AC Impedance (no load): Minimum The impedance of thechargedcell varieswith frequency,as follows: Discharge Characteristics Frequency (Hz) Impedance (milliohms) Typical Performance at 21oC (70F) (charged cell) 1.4 1000 12 1.3 230 mA Cell Voltage Above values basedon ACcurrent set at1.0ampere. 1.2 (0.1C) Value tolerances are ±20%. 460 mA 1.1 (0.2C) 1.0 0.9 Operating and Storage Temperatures: 0 3 6 6 12 Hours of Discharge To maintain maximum performance,observe the following general guidelines regarding environmentalconditions: 1.4 1.3 Charge: 0°℃to 40℃(32Fto104°F) Cell Voltage 1150mA Discharge: 0°℃to 50℃(32F to122°F) 1.2 (0.5C) Storage: -20ºC to 30℃(-4Fto86°F) 2300mA 1.1 Humidity: 65±20% (1.0C) 4600 mA 1.0 (2.0C) NOTE: Operating at extreme temperatures, will significantly 0.9 impactbattery cycle life. 0.0 0.5 1.0 1.5 2.0 2.5 Hours of Discharge Important Notice This data sheet contains typical information specific to products manufactured at the time of its publication. Contents herein do not constitute a warranty and are for reference only. FormNo.NH15-2300GL1118 Page1of1