Page 1

Energizer. PRODUCT DATASHEET European Region +44（0）2089202306 www.energizer.eu Rechargeable AA-2000(HR6) AA Specifications Classification: ACCU Rechargeable Energizer Chemical System: Nickel-Metal Hydride(NiMH) EVD Designation: IEC-HR6 Nominal Voltage: 1.2 Volts Rated Capacity: 2000mAh (to1.0 volts) Industry Standard Dimensions Basedon400mA(0.2C)dischargerate (mm) Typical Weight: 28.0 grams Typical Volume: 8.3 cubic centimeters Jacket: PlasticLabel 14.50 13.50 1.00 5.50 Minimum Maximum Internal Resistance: The internalresistance ofthe cell varies with state of charge, as follows: CellCharged Cell1/2 Discharged 50.50 49.20 30 milliohms 40 milliohms (tolerance of ±20% applies to above values) ACImpedance (No Load): 7.00 The impedance of the charged cell varies Minimum with frequency, as follows: Typical Discharge Characteristics Frequency (Hz) Impedance (milliohms) Typical Performance at 21C (ChargedCell) 1.4 1000 12 1.3 Cell Voltage 200 mA Abovevalues based onAC current set at1.0ampere. 1.2 (0.1C) Value tolerances are ±20%. 400 mA 1.1 (0.2C) 1.0 Operating and Storage Temperatures: 0.9 To maintain maximum performance, observe the following 0 3 6 6 12 general guidelines regarding environmental conditions. Hours of Discharge Charge: 0Cto 40℃ TypicalPerformance at21C Discharge: 0Cto50C 1.4 Storage: -20Cto30C 1.3 Humidity: 65±20% Cell Voltage 1.0A 1.2 (0.5C) Operating at extreme temperatures, 2.0A 1.1 will significantly impact battery cycle life. (1.0C) 4.0A 1.0 (2.0C) 0.9 0.0 0.5 1.0 1.5 2.0 2.5 Hours of Discharge Important Notice This datasheetcontains information specific to battery chargers manufactured at thetime of its publication. ©Energizer Holdings,Inc. - Contentsherein do not constitute a warranty. FormNo.EBC-8833EU-A Page1of1